Blog

By the time people realize that there is road tar stuck to the car it’s too late for an easy clean. The tires get stuck with sticky tar from road work, and it hits the car and sticks to it. It can get everywhere! We have even seen it on car roofs and tail gates of SUV’s, however that happens.
When tar hardens, it fuses with the car paint. Once this has happened, tar removal can become tricky and risk having a breakthrough event into the car paint during removal. Even if you find the tar quickly, it is still a messy material that sticks to everything when you try to remove it.

How to buff out scratches on a car is one of the best questions because the answer changes depending on the car detailer preferences. There is more than one way to buff out scratches. This allows a certain level of creativity and planning to meet customer expectations & that keeps it interesting.
No scratch removal products can remove a car scratch alone. They need to be used with car polishing in order to slowly remove the clear coating from the surrounding area. This is done until the scratch has a good bevel, or it reaches the bottom of the scratch.

Rock chip repair is something that most people ignore even after they notice the damage on their car. Everyone knows that rock chipped paint can cause rust, which could ruin the paint job. It’s incredible to see hundreds of cars every year, and 95% of them have untreated rust or unpainted rock chips.
Car dealerships repair services probably touched up another 3% of those cars before they flipped the unit. We applaud for the 2% that see the reality. Rust can decrease your investment’s value by a lot of money. Spending just $10 on touch up paint can prevent it.

Our experts will teach you how to remove rust on metal the right way the first time. Typically, a rust remover spray from a auto parts store is not enough. It may require several hours to finish the task.
If you do nothing, then it will continue to grow and possibly become non-repairable. This article will provide information on the reasons, methods, and steps involved in completing a rust repair. Don’t miss our ridiculously long list of everything car detailing for more great articles on all of your interest.

To properly remove road paint from a car without damaging the paint, you will need to also understand what road paint is made from and how it works. Reading this article will teach you how paint thinner breaks the bonds within the acrylic resins. This process frees the solid materials, allowing you to remove them with a microfiber towel.
Typically, road paints are made from acrylic resins. Acrylic road paint is a good option. It is strong, long-lasting, and resistant to weather. Additionally, it is flexible and dries fast due to its water base.

Learning how to wet sand a car will take experience before anyone can understand it’s benefits and limitations. Accurate knowledge of wet sanding a car is critical to shortening the time it takes to gain experience.
Testing accurate knowledge gives instant results for comparing future attempts, which can either improve or worsen the situation.

Let’s think about how to get bugs off a car without damage to the paint. When you look at the front of your car, you’ll see that the bugs on your car are no longer recognizable. Just leftover hard bits usually embedded deep into that car bumper paint. To remove bug guts from a car, follow at least the first 2 steps mentioned in this topic.

To remove tree sap from a car, use a clay bar rub with soapy warm water. Follow this article on clay bar rubbing to level up your understanding to avoid scratches and get the best results possible.
It may take time, but with a little elbow grease it is the safest method to safely remove tree sap. If the clay bar gets clogged, you have two options. You can remove the clogged part and throw it away. Otherwise, you can fold and knead the clay until it absorbs all the tree sap.

Knowing how to clay bar a car and knowing how to use a clay bar are not equal things. It’s easy to see that a clay bar rub will break free microscopic contaminants embedded into the factory finish but using a clay bar on a car can be risky as it will probably scratch the paint along the way. It’s important to know how to use it properly and that clay bars are not all the same.

How to clean car windows the right way begins with a basic understanding of automotive glass. Over time, car widows exposed to the harsh environment will suffer etching damages, scratches and tiny rock chips. These stains are likely etched by acid rain, so window cleaners and paper towels may not remove them. Glass correction occurs when a buffer machine physically removes those acid etchings to make the glass surface smooth and shiny again.